Category: Uncategorized

Posted on by

Adhesive currently not available… UPDATE 16.02.2024

Hi & HAPPY NEW YEAR! 🙂

Unfortunately, our 2024 started with a few problems with the procurement of our adhesive sleeves. Our supplier has changed his minimum order quantity to an unrealistic figure for us and we can no longer get the adhesive sleeves (ALU). We will immediately try to find a temporary solution for NOW, but there is no option so all orders with adhesive sets will have to WAIT. We hope that this will be solved in the next 14 days and will get back to you as soon as possible! Simply removing the articles from the store is unfortunately a very time-consuming process, as it affects 9 languages and the product finder function and I can’t simply click on “hide”… we would have to manually adjust every single article for every car/model and that’s simply too many in the event that we then have to change everything back again in a few days. Please see this as a temporary solution and call us if you have any problems!

UPDATE 26.01.2024: We have 200 adhesives in stock. Still working on a solution… so at least something can be ordered.

UPDATE 04.02.2024: We have not yet been able to find a reliable source for the adhesive sleeves. Are still working on it. At the moment all adhesives are sold out again. Please order without adhesive set by setting the value for the number of adhesive sets from 1 (standard) to 0. You will only receive the rear wiper cleaning plug and no adhesive set. I hope this situation can finally be resolved in the next few weeks. SORRY for the NERV!

UPDATE 16.02.2024: So, the very last stocks are almost used up. Have probably found a temporary solution. Tubes made of aluminum only without our branding (for now). I hope the tests with the filling system run smoothly, then we can offer the glue normally again. Stock is also updated again and all items are available at short notice. THANK YOU for your patience!

Topic “calling”… Vodafone has simply “deleted” the forwarding from landline to cell phone. I only noticed this yesterday and was able to repair the setting today. We are now available by phone again. Sorry for the mistake.

 

Have a good start to the year!!!

 

Stefan & Team

 

Posted on by

100,- Euro for you!

Hi, we need your help!

 

We are missing confirmation of the rear wiper hole dimension in the rear window for the following vehicles. If you yourself, or a friend of yours has one of the following vehicles and wants to clean the wiper, please talk to him, we GIVE you the plug with glue and cleaner worth 35,- Euro incl. EU shipping + 65,- Euro expense allowance by bank transfer, or PayPal when sending the dimensions + a photo of the tailgate from the outside and one from the inside without trim / rear wiper.

That’s a total of 100,- Euro “given”!

 

Contact us by phone if you can digitally measure the following wiper hole and provide us with the vertical and horizontal dimensions of the wiper hole:

BMW 3 Series (G3K) 2019-2021
BMW 2 Series (U2AT) 2022-20..
BMW iX (BMWI-N) 2021-20..
Infiniti QX50 (J50/J50N) 2013-2021
Jaguar E-Pace (DF) 2017-2021
Kia Stonic (YB-KMD) 2020-20…
Lada Vesta (GF) 2017-2021
Land Rover Range Rover Sport (LW) 2017-2021
Mazda 5 (CW) 2010-2021
Mazda 6 (GJ/GH) 2012-2021
Mazda MX-30 (DR) 2020-20…
Mercedes-Benz B-Class (F2B) 2019-2021
Mercedes-Benz Citan (X) 2012-2021
MG EHS (AS23P-L) 2022-20…
MG ZS (1) 2019-20..
Nissan X-Trail (T32) 2014-2021
Opel Astra (F) 2021-20…
Peugeot 2008 (U) 2019-2021
Peugeot 3008 (M) 2016-2021
Ssangyong Actyon Sports (QJ) 2012-2021

Posted on by

150 New vehicles // Happy New Year // What is planned for 2023?

Hi, we hope you had a wonderful time between Christmas and New Year! We gave away 20 free de-wiper windshield wiper clearing kits (wiper delete kit) via Instagram, and hopefully the lucky ones will be in touch soon with a photo of the removed wiper in their rear window!

This year we are planning to redesign our website. Especially the compatibility with Chrome and Safari is still expandable. The latest changes in the Content Security Policy had shot down some parts of the templates and so it was partly not possible to click on “Order” which of course was mega be…. is. If you notice something like this, please contact us – we will try to fix the problems as soon as possible. Basically, you should be able to buy glass rear wiper covers from us from all terminals easy.

Update

We were able to add 152 new vehicles to the fleet. Unfortunately, the dimensions of the rear wiper holes are not yet verified for all cars, so there may be some initial misdeliveries. please note that we deliver our de-wiper sets worldwide and then also gladly exchange non-fitting rear wiper plugs – only please do not damage the glass covers when you try them in the hole in the rear window of the car! Small tip to all with defective rear wiper -> simply replace with a glass plug from gecleant.de! 😉

 

152 new vehicles online

Here is the list of all new models:

Posted on by

2022 updates – everything stays the same and yet… :)

Hi,

As already announced several times, we have to switch off the material selection tinted (gray glass) and untinted (green glass) because the procurement of materials keeps getting stuck and we have unnecessarily delayed production. Since the float gray variant, i.e. gray tinted glass, looks much better – but unfortunately is more expensive – we only offered this as an option for privacy glazed vehicle rear windows. We will now manufacture all rear wiper plugs from this expensive material. That means there is no choice and the price goes up a bit. We had already announced this in June 2021.

The new all-inclusive price for a stopper incl. Glue set (glue and cleaner) shipping and packaging is now 35 euros. This is the amount in Germany incl. VAT since the local VAT rate has been in effect in the EU since the end of 2021. This may vary slightly for you. Internationally, the rear window wiper replacement costs EUR 37.50 incl. tracking.

Furthermore, there is now a hotline +49 341 46387532 because the helpdesk / e-mail system keeps causing problems and the best way to reach us is by phone. So if you have a problem with your stopper, please just call us, use the live chat on the website (green as soon as an employee is available) and only write an e-mail if it doesn’t work anymore. We are only a small manufactory and unfortunately cannot clarify every problem in writing. That’s just too much effort. Please just call and we’ll sort it out straight away. THANKS!

Otherwise, the highest quality of the product is our primary goal. The view of the rear of the vehicle without the rear window wiper is and remains the greatest change with the least amount of effort when it comes to vehicle refinement. Rear washer clean from the glass insert. Finished. Looks good, fits perfectly and is easy to install.

Have a nice 2022…

Your gecleant.de team Marie, Markus, Stefan and Tom. 🙂

 

 

Posted on by

Instructions for a Golf VI

Dismantling the rear window wiper using the example of the Volkswagen Golf VI.

 

The whole procedure can be broken down into three parts:

– Disassembly of the wiper

– Disassembly of the wiper motor

– the installation of the plug

 

  1. Disassembly of the wiper.

 

Lift the cap on the wiper arm and loosen the M10 nut.

 

Then fold up the wiper arm and move it gently in different directions.

The wiper arm should now detach from the cone of the motor shaft.

 

 

 

 

  1. Disassembly of the wiper motor

 

Disconnect the vehicle battery.

Open the tailgate and remove the lower tailgate panel.

To do this, remove the two Torx T20 screws in the recessed grip.

 

Slide a plastic wedge under the panel. It is best to start at the bottom of the tailgate edge. Pull the panel with a little force. Leave the spring clips in place (8 pieces). The tailgate spring clips are located there (interior view).

It can always break something, but at ambient temperatures above 20 ° C there should be no problem.

Then remove the tailgate trim from the window trim. Now you will see the wiper motor.

Disconnect the cables from the wiper motor.

Secure the loose cables to an existing wiring harness with cable ties.

 

Then loosen the three screws and carefully remove the wiper motor from the tailgate.

 

 

  1. the installation of the plug

 

Thoroughly clean the disc and stopper beforehand with a solvent-free cleaner.
Then pull a narrow bead of adhesive / adhesive strip approx. 1mm from the edge of the hole onto the window from the inside.
Then press the carefully cleaned stopper into the hole from the inside and align the stopper.

Hints: There must not be too much adhesive on the window so that it does not come into contact with the visible surface of the plug when it is pressed in. However, it should be sufficient to enable continuous bonding all around.

 

If a bit of glue oozes out on the inside, that’s not so bad, you can spread it around the stopper and thus provide additional support. (the rest of the glue in the 3g tube is also suitable for this)

 

 

Wait until the window adhesive has completely hardened. Assemble the tailgate trim in reverse order. Make sure that the spring clips are correctly seated.

Enjoy the clean look of the car!

 

 

 

Nikita Perlen aka SNM

Translated by M.Buss